Microseven Systems MSHRC080W Spezifikationen PDF herunterladen (Seite 11)

Microseven® MSHRC080W IR Network IP Camera

- 11 -

Bracket under camera

Loosen the two fixing bolts, remove the installing adapter from top of camera and install it under the

camera, then install camera on bracket.

Note: Install adapter by using the original two bolts, bolt with too large length may damage internal

parts.

" ① is 3-inch plastic hose. During installation one 3-inch plastic hose need to be used

outside the connection cables.

" ② cannot be exposed during installation so that the camera would not be damaged by

the rain.

7. Basic System Diagram and Operating Circumstance

Operating environment

After the equipment installed and connected to the network, it should be operated on Server

Software Platform of Microseven Digital Video Server.

8. Specifications

Item Sub-item Index

Camera

Parameter

Pick-up Device 1/3’’ Sony Super HAD CCD

Pixel 795(H)×597(V)PAL 768(H)×494(V) NTSC

Horizontal Resolution 480TVL

Scanning Area 4.9mm(H)×3.7mm(V)

Scanning Mode

625 Lines/50 Fields/25 Frame(PAL)

525 Lines/60 Fields/30 Frame(NTSC)

Horizontal 15.625KHz (PAL), 15.750KHz (NTSC)

Vertical 50Hz(PAL), 60Hz(NTSC)

Video

Video Output 1 channel PAL/NTSC, 1.0V[p-p] 75Ω (BNC)

Image Compression

Standard

H.264

Resolution QCIF: 176 * 144 (PAL), 176*120 (NTSC)

MSH

RD080

1 2 ... 6 7 8 9 10 11 12 13

Keine Kommentare

Microseven Systems MSHRC080W Spezifikationen Seite 11